Updated the Odroid U3 to Kernel 4.1-rc2, from https://github.com/tobiasjakobi/linux-odroid/tree/odroid-4.1.y Apart from the SELinux shenanigans (see previous post..) there were no problems.. Fedora release 22 (Twenty Two) Kernel 4.1.0-rc2 on an armv7l (ttySAC1) ….. ]# uname -a Linux rgodroid 4.1.0-rc2 #1 SMP Wed May 6 11:44:37 PDT 2015 armv7l armv7l armv7l GNU/Linux I had updated to Fedora 22 … Continue reading →
After updating the Odroid U3 to kernel 4.1-rc2 (see separate post) I encountered more SELinux / Fedora 22 issues.. This time, SELinux tried to enable itself in ‘targeted’ mode on reboot, despite being ‘disabled’ in the config file.. …. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Preprocess NFS configuration. … Continue reading →
I updated the CuBox-i4-Pro (Fedora 22) to Kernel 4.1-rc2, but the (re)boot process was very sluggish, with several key commands failing: ….. systemd[1]: Unit dbus.service entered failed state ….. [FAILED] Failed to start Login Service. ….. [FAILED] Failed to start Modem Manager. ….. [FAILED] Failed to start Avahi mDNS/DNS-SD Stack. ….. [FAILED] Failed to start Network Manager. … Continue reading →
Updated the CuBox-i4Pro to kernel 4.1-rc1 from kernel.org.. Fedora release 22 (Twenty Two) Kernel 4.1.0-rc1 on an armv7l (ttymxc0) ………. # uname -a Linux rgcubox 4.1.0-rc1 #1 SMP Sun Apr 26 23:15:50 EDT 2015 armv7l armv7l armv7l GNU/Linux I did try to do the same with the DreamPlug, but for some reason it would not boot… More … Continue reading →
I should have known that 4.1-rc1 would show up just after I published my linux-next article, and here it is.. ftp://ftp.kernel.org/pub/linux/kernel/v4.x/testing/linux-4.1-rc1.tar.xz $ uname -a Linux rg6830l 4.1.0-rc1 #1 SMP Sun Apr 26 18:56:05 PDT 2015 x86_64 x86_64 x86_64 GNU/Linux Brief details are here: http://lkml.iu.edu/hypermail/linux/kernel/1504.3/01263.html As with linux-next from April 24, the (patched) VMware 11.1.0 compiled and loaded … Continue reading →
As Kernel 4.1-rc1 is not released yet, I tested the April 24 version of linux-next, to see how VMware and NVIDIA compiles would behave.. # uname -a Linux rg6830l 4.0.0-next-20150424 #2 SMP Sun Apr 26 12:04:54 PDT 2015 x86_64 x86_64 x86_64 GNU/Linux With this version, VMware 11.1 (with the 3.19 vmnet patch) compiled and loaded OK, but … Continue reading →
The initial release of Kernel 4.1-rc1 should be out fairly soon, but this time it might possibly break some things..?. There will be a lot of ‘improvements’ to x86-related code: http://lkml.iu.edu/hypermail/linux/kernel/1504.1/03389.html. So – we have been warned! Robert Gadsdon. April 24, 2015. … Continue reading →
Finally managed to get the Raspberry Pi2 (armv7) to boot Kernel 4.0, by re-creating the kernel config from scratch, with # make bcm2709_defconfig Fedora release 21 (Twenty One) Kernel 4.0.0-v7 on an armv7l (ttyAMA0) ………… ]# uname -a Linux rgpi2 4.0.0-v7 #1 SMP PREEMPT Wed Apr 15 17:12:00 PDT 2015 armv7l armv7l armv7l GNU/Linux The ‘classic’ Pi … Continue reading →
Tried updating the Raspberry Pi-s (Classic model B and Pi2) to Kernel 4.0, from https://github.com/raspberrypi/linux/tree/rpi-4.0.y, and my first attempt was – it seems – too soon, as the Classic Pi (armv6) failed to boot at all, and the Pi2 (armv7) only booted as far as: …………. bcm2708_dma: DMA manager at f3007000 bcm2708_gpio: bcm2708_gpio_probe 80625490 vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 … Continue reading →
Updated the DreamPlug and CuBox-i4Pro to kernel 4.0 from kernel.org: Fedora release 18 (Spherical Cow) Kernel 4.0.0 on an armv5tel (ttyS0) ……… # uname -a Linux rgdreamplug 4.0.0 #1 Sun Apr 12 22:53:28 PDT 2015 armv5tel armv5tel armv5tel GNU/Linux Fedora release 22 (Twenty Two) Kernel 4.0.0 on an armv7l (ttymxc0) ……… ]# uname -a Linux rgcubox 4.0.0 … Continue reading →