I have been testing Fedora 33 pre-release, and on x86_64 it seems relatively stable (usual caveats…) but on arm64 systems (Odroid N2 and Pi4) I found that after compiling a new kernel (5.8.3), the system booted, but login was impossible, and screen output was missing (uart/console was OK). Kernels compiled with Fedora 32 all booted OK, and … Continue reading →
I have recently acquired an Odroid N2 (4GB) and managed – with some difficulty – to get it to run a ‘modern’ U-Boot, Kernel 5.6-rc2, with EFI support, and Fedora 31. This time, there were no clues from OpenSuse, and all the examples I found still used the ancient/custom Hardkernel u-boot and a kernel.img ‘blob. Fortunately, the … Continue reading →
When doing a # dnf system-upgrade reboot on an ARM64 system you may encounter a stream of GPG errors, followed by reboot, without upgrade. To fix this, simply import the F28 GPG key in advance, as done for Rawhide: # rpm –import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-28-primary After this, the system-upgrade should proceed correctly.. Robert Gadsdon. July 6, 2018 … Continue reading →
Thanks to Heiner Kallweit for info on two USB patches for the Odroid C2, and thanks to John Youn for the patches themselves.. They can be found at http://www.spinics.net/lists/linux-usb/msg151687.html and http://www.spinics.net/lists/linux-usb/msg151688.html . I have applied these to Kernel 4.10-rc4 (including the Ethernet TX patch) and now USB is working, and detects/connects devices – sort of.. Plug in … Continue reading →
Just updated the Odroid C2 to Kernel 4.10-rc4, but the Ethernet hang problem still persists.. Applied the dts Ethernet TX patch (see http://rglinuxtech.com/?p=1872 ) , and it works OK now.. There seems to be a bit of a backlog of Meson/GXBB patches, and I read that the Ethernet TX fix was supposed to be merged with -rc4, … Continue reading →
As Odroid C2 support by the ‘mainline’ kernel is – hopefully – nearing completion, I have put a sample of my Kernel config at http://pastebin.com/XWfMEWHx . The C2 is used for ‘headless’ operation, at present, and USB still does not work.. The kernel is 4.10-rc3, with the ‘Ethernet-TX’ dts patch applied.. (see http://rglinuxtech.com/?p=1872 ). Robert Gadsdon. January … Continue reading →
Thanks to Heiner Kallweit, there is now a functional version of U-Boot for the Odroid C2, at https://github.com/hkallweit/u-boot .. I have installed it on my C2 (eMMC) and it works fine.. Nice to have a functioning > saveenv command, at last.. U-Boot 2017.01-rc3 (Jan 14 2017 – 02:22:15 -0800) odroid-c2 DRAM: 2 GiB MMC: meson_mmc: 0, meson_mmc: … Continue reading →
There is now an ‘official’ fix for the 4.10-rc1 compile failure with ARM64/aarch64, from Al Viro, and the patch itself is available here: https://git.kernel.org/cgit/linux/kernel/git/viro/vfs.git/commit/?h=arm64-fix&id=b4b8664d291ac1998e0f0bcdc96b6397f0fe68b3 I have applied this to kernel 4.10-rc1 on the Odroid C2, and the kernel compiles successfully.. Robert Gadsdon. December 27, 2016. … Continue reading →
After applying the aarch64 compile fix (see previous article) I was able to compile Kernel 4.10-rc1 on the Odroid C2, and it boots OK (headless..), and the Ethernet link stays up, but still needs the TX patch.. (updated, as the link did still hang – eventually.. RG).. ……….. meson8b-dwmac c9410000.ethernet eth0: Link is Up – 1Gbps/Full – … Continue reading →
After some of the recent ‘Ethernet fix’ patches have not worked with more recent linux-next kernels, I have found one that – at least at the moment – does fix the ‘hang’ problem – again.. The patch is applied to meson-gxbb-odroidc2.dts, and can be found here: http://archive.arm.linux.org.uk/lurker/message/20161221.113134.3ac4d1e6.en.html I did have to revert this kasir_offset patch (…-R) to … Continue reading →