After the – partial – success with the 96Boards Hikey, I tried the Qualcomm Dragonboard 410c, but the June 29 Linux-Next failed to boot successfully, with only one CPU initialising, and MMC errors, and eventual hang…. ……………………….. psci: failed to boot CPU1 (-95) CPU1: failed to boot: -95 CPU1: failed in unknown state : 0x0 psci: failed … Continue reading →
Updated the DragonBoard 410c to Kernel 4.2.4: # git clone https://git.linaro.org/landing-teams/working/qualcomm/kernel.git -b release/qcomlt-4.2 and this version boot/runs OK.. I am running these systems ‘headless’, so have not been able to test monitor/display capabilities.. Fedora 23 (Twenty Three) Kernel 4.2.4 on an aarch64 (ttyMSM0) ……………… # uname -a Linux rg410c 4.2.4 #1 SMP PREEMPT Wed Nov 11 04:12:36 … Continue reading →
One of the shortcomings of the DragonBoard 410c was that it relied on the Android-phone-centric fastboot for any Kernel updates, but now there is a version of U-Boot available, thanks to Mateusz Kulikowski.. This is very much a work-in-progress, but I thought I would give it a try… I started with the version at https://github.com/hallor/u-boot/tree/dragonboard-2015.11.01, and made … Continue reading →
Just updated the Qualcomm DragonBoard 410c to Linaro/Qcom patched Kernel 4.2, from here: https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/tree/refs/heads/integration-linux-qcomlt Using the saved kernel config from 4.2-rc5, the system booted OK (headless)..: Fedora release 23 (Twenty Three) Kernel 4.2.0 on an aarch64 (ttyMSM0) ……………. # uname -a Linux rg410c 4.2.0 #1 SMP PREEMPT Sun Sep 13 20:13:35 PDT 2015 aarch64 aarch64 aarch64 GNU/Linux … Continue reading →
Just updated the Qualcomm DragonBoard 410c to (patched..) Kernel 4.2-rc5, from here: https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/shortlog/refs/heads/integration-linux-qcomlt This time, the boot was successful, and the mmc1 SDcard (rootfs) was recognised correctly.. Fedora release 23 (Twenty Three) Kernel 4.2.0-rc5 on an aarch64 (ttyMSM0) ……… ]# uname -a Linux rg410c 4.2.0-rc5 #1 SMP PREEMPT Tue Aug 25 11:38:52 PDT 2015 aarch64 aarch64 aarch64 … Continue reading →
Updated the DragonBoard 410c to patched Kernel 4.2-rc1 from https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/tree/refs/heads/integration-linux-qcomlt , and the system booted OK: Fedora release 22 (Twenty Two) Kernel 4.2.0-rc1+ on an aarch64 (ttyMSM0) ……….. # uname -a Linux rg410c 4.2.0-rc1+ #2 SMP PREEMPT Thu Jul 16 15:14:27 PDT 2015 aarch64 aarch64 aarch64 GNU/Linux – But, on further testing, the SD Card (mmc1) had … Continue reading →
Managed to update the DragonBoard 410c to Linaro Kernel 4.1.0+, from here: git clone https://git.linaro.org/landing-teams/working/qualcomm/kernel.git -b integration-linux-qcomlt So far, I have made the kernel ‘monolithic’ with all necessary modules built-in (‘y” instead of ‘m’), as this was how the original Linaro/Qualcomm kernel was built.. As the 410c uses the android fastboot, it would seem that the kernel/boot … Continue reading →
After quite a lot of messing about, I got Fedora 22 running on the ARM64 DragonBoard 410c: Fedora release 22 (Twenty Two) Kernel 4.0.0-linaro-lt-qcom on an aarch64 (ttyMSM0) ………… $ uname -a Linux rg410c rg410c.almaden 4.0.0-linaro-lt-qcom #1 SMP PREEMPT Fri Jun 5 15:17:06 UTC 2015 aarch64 aarch64 aarch64 GNU/Linux Still running the ‘stock’ Linaro/Qualcom version of Kernel … Continue reading →
Just took delivery of a Qualcomm Dragonboard 410c (https://developer.qualcomm.com/hardware/dragonboard-410c) : The unit is based on a ‘standard’ (96Boards) design, with a few quirks.. The device uses fastboot rather than U-Boot, and in this respect is more like flashing a custom ROM on a cellphone! It even has on-board volume up/down buttons.. There is no Ethernet built-in, so … Continue reading →