There is an updated patch for NVIDIA 440-59 with Kernel 5.3, which includes the Y2038 fixes, at https://gitlab.com/snippets/1937313 This compiles with GCC10 now, and I have briefly tested it on my Fedora32 system, with KDE/Plasma and VMware, and it seems to be working OK. Robert Gadsdon. February 25th 2020. … Continue reading →
Thanks to Isaak I. Aleksandrov, there is now an additional patch for NVIDIA driver 440.59 to accommodate the Y2038 changes in Kernel 5.6-rc3. This should be applied after the original 5.6-rc1 patch ( https://gitlab.com/snippets/1937313 ), and can be found here: https://gitlab.com/snippets/1944237 I have tested this, and it compiles OK with GCC9 (current distros) but fails with GCC10 … Continue reading →
I have updated some test systems (x86_64 and aarch64) to pre-beta Fedora 32, which now includes GCC 10: $ gcc –version gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8) There have been a couple of problems with kernel compilation, but in each case there was already a patch/workaround available.. https://www.spinics.net/linux/fedora/fedora-arm/msg13193.html and https://lkml.org/lkml/2020/1/29/494 The most serious problem was a … Continue reading →
I have recently acquired an Odroid N2 (4GB) and managed – with some difficulty – to get it to run a ‘modern’ U-Boot, Kernel 5.6-rc2, with EFI support, and Fedora 31. This time, there were no clues from OpenSuse, and all the examples I found still used the ancient/custom Hardkernel u-boot and a kernel.img ‘blob. Fortunately, the … Continue reading →
After more testing, it appears that there is still a problem with the Intel e1000e driver and some – but not all – supported NICs.. I have several ex-HP systems that have Intel NICs, and some have more than one. The HP Z820 has two (different models..): $ lspci |grep Eth 00:19.0 Ethernet controller: Intel Corporation 82579LM … Continue reading →
Kernel 5.4-rc1 is out – a day later than usual, and brief details are here: http://lkml.iu.edu/hypermail/linux/kernel/1909.3/04895.html My tests with VMware and NVIDIA revealed some odd errors/warning relating to kernel symbols.. With the latest NVIDIA (435.21) I got the following: # make make[1]: Entering directory ‘/usr/src/linux-5.4-rc1’ The Module.symvers file is missing, or does not contain any symbols exported … Continue reading →
After successfully updating and re-configuring the Odroid C2 to use Fedora uefi/grub2 to boot, I decided to try to do the same to the even-older Hikey SOC. This already booted using fastboot with an older version of grub, with manual configuration, but I wanted to use the standard (Fedora) boot process. I had read that there was … Continue reading →
Testing Fedora 31 – which is still work-in-progress, of course.. Tried to use # rpmbuild –rebuild to create a missing RPM from a F30 source RPM, and found the following error: ………….. Illegal char ‘)’ (0x29) in: Obsoletes:………. I found a reference to this error in the buglist, but it had been flagged as ‘rawhide’, and closed, … Continue reading →
When the Odroid C2 was first released way back in 2016, I spent ages trying to get it to function correctly with a mainstream kernel, and tested innumerable development versions of U-Boot, including functionality that was working OK at that time, but that – for some reason – then failed to be included in the ‘mainstream’ U-Boot.. … Continue reading →
I had previously set up several dual-boot Fedora Linux/Win7 systems, but now had the challenge of doing the same for MacOS as well.. This is absolutely not the place for any discussion on the ramifications of the ‘Hackintosh’ movement, but it will suffice to use that terrible phrase ‘Google is your friend..’.. The Clover/MacOS instance was on … Continue reading →