Just acquired a 64-bit Odroid C2: As usual, I installed Fedora 23 aarch64 on it: Fedora 23 (Twenty Three) Kernel 3.14.29 on an aarch64 (ttyS0) ………………… # uname -a Linux rgc2 3.14.29 #1 SMP PREEMPT Wed Mar 9 11:14:41 PST 2016 aarch64 aarch64 aarch64 GNU/Linux The only kernel source available – so far – is a heavily-patched … Continue reading →
Updated the DragonBoard 410c to Kernel 4.2.4: # git clone https://git.linaro.org/landing-teams/working/qualcomm/kernel.git -b release/qcomlt-4.2 and this version boot/runs OK.. I am running these systems ‘headless’, so have not been able to test monitor/display capabilities.. Fedora 23 (Twenty Three) Kernel 4.2.4 on an aarch64 (ttyMSM0) ……………… # uname -a Linux rg410c 4.2.4 #1 SMP PREEMPT Wed Nov 11 04:12:36 … Continue reading →
One of the shortcomings of the DragonBoard 410c was that it relied on the Android-phone-centric fastboot for any Kernel updates, but now there is a version of U-Boot available, thanks to Mateusz Kulikowski.. This is very much a work-in-progress, but I thought I would give it a try… I started with the version at https://github.com/hallor/u-boot/tree/dragonboard-2015.11.01, and made … Continue reading →
Just updated the Qualcomm DragonBoard 410c to (patched..) Kernel 4.2-rc5, from here: https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/shortlog/refs/heads/integration-linux-qcomlt This time, the boot was successful, and the mmc1 SDcard (rootfs) was recognised correctly.. Fedora release 23 (Twenty Three) Kernel 4.2.0-rc5 on an aarch64 (ttyMSM0) ……… ]# uname -a Linux rg410c 4.2.0-rc5 #1 SMP PREEMPT Tue Aug 25 11:38:52 PDT 2015 aarch64 aarch64 aarch64 … Continue reading →
After some more testing, including trying (unsuccessfully) the HiKey version of Kernel 4.1-rc4 # git clone -b hikey-mainline-rebase –single-branch https://github.com/96boards/linux/ I was frustrated by the complete lack of kernel boot info on screen, after the proprietary bootloader had finished.. More research found that this bootloader was described as somewhat deficient in the ‘fit for purpose’ department, and … Continue reading →
Updated the DragonBoard 410c to patched Kernel 4.2-rc1 from https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/tree/refs/heads/integration-linux-qcomlt , and the system booted OK: Fedora release 22 (Twenty Two) Kernel 4.2.0-rc1+ on an aarch64 (ttyMSM0) ……….. # uname -a Linux rg410c 4.2.0-rc1+ #2 SMP PREEMPT Thu Jul 16 15:14:27 PDT 2015 aarch64 aarch64 aarch64 GNU/Linux – But, on further testing, the SD Card (mmc1) had … Continue reading →
One of the most annoying missing features of the HiKey ARM54 board is the lack of a proper UART connection, to enable the same degree of boot information as other SoC systems.. There is a 4-pin/hole connection point, but no actual connector… So, I had to get out the (mini) soldering iron, and magnifying goggles, and use … Continue reading →
I had another ARM64 system on order for some time, and – unexpectedly – it shipped a few days ago.. It is an 8-core ‘Hikey’ board, based on the same 96Boards outline as the DragonBoard 410c.. So far, I have it booting – with the Linaro/Hikey 3.18 kernel – and have put Fedora 22 on it.. Fedora … Continue reading →
After quite a lot of messing about, I got Fedora 22 running on the ARM64 DragonBoard 410c: Fedora release 22 (Twenty Two) Kernel 4.0.0-linaro-lt-qcom on an aarch64 (ttyMSM0) ………… $ uname -a Linux rg410c rg410c.almaden 4.0.0-linaro-lt-qcom #1 SMP PREEMPT Fri Jun 5 15:17:06 UTC 2015 aarch64 aarch64 aarch64 GNU/Linux Still running the ‘stock’ Linaro/Qualcom version of Kernel … Continue reading →
Just took delivery of a Qualcomm Dragonboard 410c (https://developer.qualcomm.com/hardware/dragonboard-410c) : The unit is based on a ‘standard’ (96Boards) design, with a few quirks.. The device uses fastboot rather than U-Boot, and in this respect is more like flashing a custom ROM on a cellphone! It even has on-board volume up/down buttons.. There is no Ethernet built-in, so … Continue reading →