↓
 

Adventures With Linux ™

Linux Technologies and Fun Times..

  • Home
  • About the Author…
  • Copyright and Trademarks..

Category Archives: kernel

Post navigation

← Older posts
Newer posts →

KERNEL – 4.5 Final – No Need for -RC8..

Adventures With Linux ™ Posted on March 14, 2016 by RGMarch 14, 2016

Kernel 4.5 Final is out, and – as expected – is OK with the latest NVIDIA (361.28) and VMware (12.1.0).. There was nearly one more -RC, but it seems Final was released, instead.. Brief details here:  http://lkml.iu.edu/hypermail/linux/kernel/1603.1/04467.html Robert Gadsdon.  March 14, 2016. … Continue reading →

Posted in kernel, Linux | Tagged kernel 4.5 final, linux, no need for -rc8, ok with nvidia and vmware latest | 3 Replies

ARM – Rock2 – Kernel 4.5-rc7 Boot Success

Adventures With Linux ™ Posted on March 13, 2016 by RGMarch 13, 2016

After a lot of testing, and some more confusion, I have managed to get the Rock2 to boot using the latest (2016.03-rc3) version of U-Boot, and the latest kernel (4.5-rc7) As previously, there was a lot of conflicting information……. I started by booting into the semi-proprietary 3.10-based kernel on the SDcard, and then erasing the eMMC (dd … Continue reading →

Posted in armv7, boot, compilation, Fedora, Hacks, kernel, Linux / ARM, Rock2, rx3288, U-Boot | Tagged armv7, fedora 23, kernel 4.5-rc7, radxa, rock2, success, uboot 2016.03-rc3 | Leave a reply

ARM – Odroid C2 – 64bit, with Ethernet..

Adventures With Linux ™ Posted on March 11, 2016 by RGMarch 11, 2016

Just acquired a 64-bit Odroid C2: As usual, I installed Fedora 23 aarch64 on it: Fedora 23 (Twenty Three) Kernel 3.14.29 on an aarch64 (ttyS0) ………………… # uname -a Linux rgc2 3.14.29 #1 SMP PREEMPT Wed Mar 9 11:14:41 PST 2016 aarch64 aarch64 aarch64 GNU/Linux The only kernel source available – so far – is a heavily-patched … Continue reading →

Posted in aarch64, ARM64, Fedora, kernel, Linux / ARM, Odroid C2 | Tagged 64-bit, aarch64, amlogic s905, arm64, fedora 23, odroid c2, success | 3 Replies

ARM – Configs for Odroid U3 and CuBox-i4Pro..

Adventures With Linux ™ Posted on February 3, 2016 by RGFebruary 3, 2016

I have just posted copies of recent kernel configs for the Odroid U3 and CuBox-i4Pro.. Odroid U3 – Kernel config for 4.4 :   http://pastebin.com/NveRajaZ CuBox-i4Pro – Kernel config for 4.4.1:  http://pastebin.com/Kbexi0A5 These do not include working WiFi, as 2.4GHz is pretty useless at my location… Robert Gadsdon.   February 2, 2016. … Continue reading →

Posted in compilation, Crash and Burn.., CuBox, Hacks, kernel, Linux / ARM, Odroid, Opinion, Performance | Tagged cubox-i4pro, examples, kernel 4.4, kernel configs, odroid u3 | 10 Replies

NVIDIA – Latest 352.xx Driver – OK with Kernel 4.5-rc1..

Adventures With Linux ™ Posted on January 25, 2016 by RGJanuary 25, 2016

Just installed the latest NVIDIA driver – 352.79 – on the test system, and it compiles and runs OK with Kernel 4.5-rc1.. Release notes etc. are here:  http://www.nvidia.com/download/driverResults.aspx/97645/en-us I had been running the ‘beta’ driver 361.18, but found that this was using up large amounts of memory (13GB, out of 16GB) when running VMware and Firefox, and … Continue reading →

Posted in kernel, Linux, NVIDIA, Opinion, Performance | Tagged 361.18 problems, kernel, kernel 4.5-rc1, linux, nvidia 352.76, success | Leave a reply

Kernel – 4.5-rc1 – OK with Latest NVIDIA and VMware..

Adventures With Linux ™ Posted on January 25, 2016 by RGJanuary 25, 2016

Just installed Kernel 4.5-rc1 on the test system, and NVIDIA 358.16 (and ‘beta’ 361.18) and VMware 12.1.0 all compile and load/run OK.. Details are here:  http://lkml.iu.edu/hypermail/linux/kernel/1601.3/00205.html $ uname -a Linux rglinux 4.5.0-rc1 #1 SMP Sun Jan 24 15:39:14 PST 2016 x86_64 x86_64 x86_64 GNU/Linux Robert Gadsdon.   January 24, 2016. … Continue reading →

Posted in Crash and Burn.., kernel, Linux, NVIDIA, Performance, VMware | Tagged kernel, kernel 4.5-rc1, linux, nvidia 358.16 361.18, ok, success, vmware 12.1.0 | Leave a reply

NVIDIA – New Beta 361.18 – OK with Plasma/KDE5..

Adventures With Linux ™ Posted on January 13, 2016 by RGJanuary 13, 2016

Just installed the latest NVIDIA beta driver – 361.18 – and it is now OK with Plasma and KDE5.. Release notes and download link here:   http://www.nvidia.com/download/driverResults.aspx/97474/en-us Notes include: ”Fixed a bug in the EGL driver where a mutex was unlocked more than once. This triggers undefined behavior, and in particular, if lock elision is enabled in glibc, … Continue reading →

Posted in Crash and Burn.., kernel, Linux, NVIDIA, Opinion, Performance, success | Tagged 361.18, beta driver, linux, nvidia, ok with plasma kde5 | Leave a reply

Kernel – 4.4 Released – OK with Latest NVIDIA and VMware..

Adventures With Linux ™ Posted on January 11, 2016 by RGJanuary 11, 2016

Updated to Kernel 4.4 ‘Final’ on the test system, and the latest VMware (12.1.0) and NVIDIA (358.16) compile and run OK..   The ‘beta’ driver 361.16 should be OK, but has multiple userland issues on my systems. – see previous post.).. $ uname -a Linux rglinux 4.4.0 #1 SMP Sun Jan 10 22:00:41 PST 2016 x86_64 x86_64 x86_64 … Continue reading →

Posted in compilation, Crash and Burn.., kernel, Linux, NVIDIA, Opinion, VMware | Tagged kernel, kernel 4.4, linux, nvidia 358.16, ok, success, vmware 12.1.0 | 2 Replies

ARM – Pi2 – Kernel 4.4-rc5 – U-Boot Fail, and Workaround..

Adventures With Linux ™ Posted on December 20, 2015 by RGDecember 20, 2015

Recently attempted to update the Pi2 to Kernel 4.4-rc5, and encountered a problem.. The more recent proprietary Raspberry Pi 2 kernels have switched to using ‘DTB Overlays’ to control various components, but these are – currently – unsupported by U-Boot.. Booting the kernel with U-Boot results in mmc errors, and register dump: ……………….. timeout waiting for hardware … Continue reading →

Posted in compilation, Crash and Burn.., fix, Hacks, kernel, Linux / ARM, Opinion, Raspberry Pi, U-Boot | Tagged dtb overlays, kernel 4.4-rc5, raspberry pi, success, u-boot fail, workaround | Leave a reply

ARM – Kernel 4.4-rc4 on the BananaPro..

Adventures With Linux ™ Posted on December 14, 2015 by RGDecember 14, 2015

Just got a ‘BananaPro‘ ARMv7 board, and updated it to Kernel 4.4-rc4 (from kernel.org) and Fedora 23. More details are here:  http://linux-sunxi.org/LeMaker_Banana_Pro I compiled U-Boot from the latest (2015.10) released version, from ftp.denx.de/pub/u-boot/ : # cd u-boot # make Bananapro_defconfig # make ARCH=arm CROSS_COMPILE=arm-linux-gnu- (or whatever cross-compiler you are using) Then as root, copy to the SDCard … Continue reading →

Posted in BananaPro, compilation, Fedora, Hacks, kernel, Linux / ARM, Opinion, Performance, U-Boot | Tagged armv7, bananapro, compile instructions, fedora 23, kernel 4.4-rc4, new, success, u-boot, zimage | Leave a reply

Post navigation

← Older posts
Newer posts →
Original content © Robert Gadsdon 2013
↑