I am setting up an HP Z820 as – primarily – a video creating/editing/restoring system, but I need to be able to boot into Windows 7 Pro (for Vegas Pro, AviSynth, Prodrenalin, Mercalli, etc. etc..) and Linux (Fedora).. I had set up dual-boot systems before, and I am still using Windows 7 Pro SP1, but this time … Continue reading →
I decided – after some time – to do some more with the Raspberry Pi 3, and set it up as a small network print server.. As there was now an ‘official’ version of Fedora 27 for the Pi3, I decided to use this.. Details are here, and links to aarch64 images are near the bottom of … Continue reading →
Just updated the Itanium2 system (RX2600/ZX9000 hybrid) to kernel 4.15-rc1, but encountered a problem with the NFSv4 code. Recent changes have exposed problems with ‘older’ compilers, and the system currently has GCC 4.3 (on Fedora 9/IA64): ………………….. CALL scripts/checksyscalls.sh <stdin>:1185:2: warning: #warning syscall perf_event_open not implemented <stdin>:1239:2: warning: #warning syscall seccomp not implemented <stdin>:1317:2: warning: #warning syscall … Continue reading →
Ever since I spent some considerable time promoting HP’s IA64 Linux systems, way back in the early-2000’s, I have always wanted one for myself, and I recently managed to acquire an RX2600 1U server for a very reasonable price, and beef it up with some inexpensive parts from eBay.. The spec – at the moment – is … Continue reading →
There has been a new release of Workstation 12.5 – 12.5.8 – and the – rather vague – release notes are here: https://docs.vmware.com/en/VMware-Workstation-Pro/12.0/rn/workstation-1258-release-notes.html I tested this with a ‘clean’ install on my cash-and-burn system, and basically, it suffers from the same compatibility problems as 12.5.7. GCC7, Fedora 26/27, and Kernel 14.x all cause it to fail. # … Continue reading →
After upgrading four Fedora systems (x86_64) from release 26 to 27, using # dnf system-upgrade download –refresh –releasever=27 –allowerasing –nogpgcheck –best -y, two of these worked OK, but two failed – with a sudden reboot, back to F26 – and no (apparent) error displayed, after # dnf system-upgrade reboot had rebooted the system, and the upgrade process … Continue reading →
VMware Workstation Pro 14.0.0 has been released – a bit earlier than expected – and it has a (potentially) nasty surprise for those with ‘older’ CPUs.. Release notes are here: https://docs.vmware.com/en/VMware-Workstation-Pro/14.0.0/rn/workstation-14-release-notes.html I installed this on my test system without any problems, and was able to confirm that it compiles and loads/runs OK with Kernels 4.13.x, and that … Continue reading →
Apparently there is ‘no information’ on the possible availability of an update to the 12.5.x version of VMware, to fix the well-known problems with GCC 7 etc… If you were thinking of trying the ‘technology preview’ version – which came out some months ago – then this version also has a problem with GCC 7 (tested with … Continue reading →
After more research, I decided to get one of the Intel ‘Apollo Lake’-based SOC systems, and the one I chose was from Kodlix.. It is functionally identical with another from Beelink, and in fact the Kodlix website shows images of the Beelink version of the device.. I just preferred the Kodlix version, as the case was a … Continue reading →
VMware version 12.5.7 is out, and the release notes are here: http://pubs.vmware.com/Release_Notes/en/workstation/12/workstation-1257-release-notes.html As usual, not much actual detail, apart from “…some bug fixes and security updates.” This version compiles OK with Kernel 4.12 (tested with 4.12-rc6), but the runtime GUI and GCC7 workarounds mentioned in previous articles are still needed, for ‘newer’ distros, such as Fedora 26…. … Continue reading →