I have – after some messy hacking – managed to get the Raspberry Pi updated to kernel 3.8.0.. The starting point was the 3.7.1 Pi code, at https://github.com/Olipro/linux-RPi. The kernel.org patch for 3.8.0 assumes the code base is 3.7.0, so I had to ‘revert’ the 3.7.1 patch. The ‘incremental’ patches at kernel.org start with the 3.7.1 – … Continue reading →
This site has now been re-hosted, and all should be working correctly! The design has changed, and you can comment by clicking on the ‘speech bubble’ at the top right of each article.. Back to the important stuff! I have just updated my main system to 3.7.8, after 3.7.7.. Just FYI, 3.7.7 included quite a lot of … Continue reading →
Just updated the Raspberry Pi to kernel 3.7.7 – incrementally.. See previous posts for details on how this is done.. Fedora release 18 (Spherical Cow) Kernel 3.7.7-pi on an armv6l (ttyAMA0) …………….. ]$ uname -a Linux rgpi 3.7.7-pi #1 Tue Feb 12 17:17:08 GMT 2013 armv6l armv6l armv6l GNU/Linux Robert Gadsdon. February 12th 2013. … Continue reading →
Just installed 3.8-rc6 on my test system, and – as for the previous -rc version – the softlink + vmci patch works for VMware 9.0.1. The good news is that the latest ‘stable’ NVIDIA driver – 310.32 – now compiles OK with this kernel version.. $ uname -a Linux rg6830l 3.8.0-rc6 #1 SMP Fri Feb 1 11:39:56 … Continue reading →
Just updated the Raspberry Pi to kernel version 3.7.5, using the 3.7.1 tree created by Olipro: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=71&t=26912 I then applied the incremental patches from kernel.org to go from 3.7.1 to 3.7.2, to 3.7.3, to 3.7.4, to 3.7.5.. I ignored the warnings after the compile, as these have occurred with previous kernel versions, and seem to be harmless.. … Continue reading →
Just installed kernel 3.8-rc5 – recently released.. This release has the same dependencies as -rc4, for VMware and NVIDIA.. For VMware, apply Tim’s vmci patch (see previous article for -rc4) and use the softlink: $ ln -s /usr/src/linux-3.8-rc5/include/generated/uapi/linux/version.h /usr/src/linux-3.8-rc5/include/linux/version.h For NVIDIA, use the ‘old’ driver 310.14, as the newer 3.7-compatible drivers still won’t compile with 3.8.. $ … Continue reading →
Just updated the ARM Dreamplug to kernel 3.8-rc4, with no problems.. Fedora release 18 (Spherical Cow) Kernel 3.8.0-rc4 on an armv5tel (ttyS0) ………. # uname -a Linux rgdreamplug 3.8.0-rc4 #1 Tue Jan 22 22:22:11 GMT 2013 armv5tel armv5tel armv5tel GNU/Linux Robert Gadsdon. January 22nd, 2013 … Continue reading →
Just updated the Dreamplug to 3.8-rc1, without any problems.. Used the .config from 3.7.. Fedora release 18 (Spherical Cow) Kernel 3.8.0-rc1 on an armv5tel (ttyS0) ………………. # uname -a Linux rgdreamplug 3.8.0-rc1 #1 Wed Dec 26 22:00:22 GMT 2012 armv5tel armv5tel armv5tel GNU/Linux Robert Gadsdon. December 26th 2012. … Continue reading →
Just updated the Dreamplug kernel to 3.7, and – although I don’t use it – decided to see if the Marvell-supplied 8688_UAP (Access Point) patch still worked.. Not surprisingly, the patch worked, but the compilation failed: CC [M] drivers/net/wireless/libertas_uap/uap_main.o drivers/net/wireless/libertas_uap/uap_main.c: In function ‘uap_init_sw’: drivers/net/wireless/libertas_uap/uap_main.c:446:44: warning: passing argument 3 of ‘netlink_kernel_create’ makes pointer from integer without a cast … Continue reading →
After the success of the Raspberry Pi, I have now updated the Dreamplug to Fedora 18, using yum…. This time, the rpm –import… worked fine, and the whole process went very smoothly.. Fedora release 18 (Spherical Cow) Kernel 3.7.0-rc5 on an armv5tel (ttyS0) Robert Gadsdon. December 11th, 2012. … Continue reading →