The old meson Ethernet fix/patch/hack no longer applies cleanly to the latest (December 1) linux-next, but – fortunately – there is a ‘better’ patch available for the meson8b-dwmac driver itself.. Details can be found in this thread: http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001675.html I have applied these patches to the December 1 linux-next tree, on the Odroid C2, and the Ethernet link … Continue reading →
The ‘linux-next’ kernel branch has included the meson/gxbb mmc driver for some time, but the boot process hung on root disk access. I tested with the latest (November 17) version, and this time, the boot process completed successfully: Fedora 25 (Workstation Edition) Kernel 4.9.0-rc5-next-20161117-c2 on an aarch64 (ttyAML0) The only patch I applied was the meson_ethernet_tx one … Continue reading →
Thanks to Jerome Brunet, there is now a fix for the long-standing Ethernet hang problem on the C2.. Details are here: http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001538.html The patch is an attachment – named ‘attachment.bin‘, and so will need to be renamed to something appropriate.. I applied this to the 4.9-rc3-derived version of the C2 patched kernel, from https://git.kernel.org/cgit/linux/kernel/git/khilman/linux-amlogic.git/log/?h=v4.10/integ.. There is a … Continue reading →
I had been constantly frustrated by the Odroid C2 meson8b-dwmac Ethernet ‘hang’ problem, which has persisted over (at least..) eight different ‘patched kernel’ versions that I have tested.. The network link hung/stopped after a short time at full (1000Mbps) speed, and also – sometimes after a bit longer – at reduced (100Mbps) speed.. The driver does show … Continue reading →
I was going to update the Odroid C2 to the latest patched kernel, but then found that the meson-mmc driver had mysteriously vanished from the source tree.. This – of course – makes the kernel pretty useless… I did some research, but could not find any specific mention of the removal of this code, but then found … Continue reading →
Decided to try the Odroid C2 with the latest Kernel, and recently-released patches for MMC support.. Used the (patched) version of 4.8-rc4 from here: https://github.com/ioft/linux/tree/c2 Thanks to umiddelb for producing this, which incorporates the (e)MMC support patches, and also includes patches providing the latest version of the dwmac_meson8b Ethernet driver, and associated mods to the device tree … Continue reading →
Thanks to an additional U-Boot patch from Carlo Caione, it is now possible to (partially) boot the mainline Kernel from U-Boot on an eMMC module, as well as from SDcard.. Patch details here: https://www.mail-archive.com/u-boot@lists.denx.de/msg213468.html => mmc info Device: <NULL> Manufacturer ID: 15 OEM: 100 Name: BGND3 Tran Speed: 52000000 Rd Block Len: 512 MMC version 5.0 High … Continue reading →
After the initial patches to provide basic U-Boot support for the C2, as mentioned in a previous article – there is now a further patch, to enable MMC support. Details at https://www.mail-archive.com/u-boot@lists.denx.de/msg212503.html I have applied this additional patch, and for SDcard-based systems, it works: U-Boot 2016.05-rc3 (May 14 2016 – 21:06:28 -0700) odroid-c2 aarch64-linux-gnu-gcc (GCC) 5.3.1 20160212 … Continue reading →
After some valuable info received from Brad (see comment on my earlier article, at http://rglinuxtech.com/?p=1723 ), I found the complete set of four patches for initial C2 U-Boot support, and applied these to the latest (May 9) GIT version of U-Boot.. Thanks are also due to Beniamino Galvani for producing these patches.. Detailed instruction on how to … Continue reading →
I discovered there was a later version (6) of the U-boot patch for the Odroid C2, and also – after more research – found the reason for the compile error… It turns out that the GIT version (May 5, 2016) of U-boot currently needs two patches.. The first one is to provide psci_system_reset for armv8, and details … Continue reading →