I had tried running kernel 3.10, but encountered several problems.. The KDE desktop would ‘hang’, and the wifi connections (rt2800, using NetworkManager) refused to connect, most of the time, and kmix (sound mixer app) wouldn’t run.. I had tried all the ‘patched’ NVIDIA drivers, and found that the ‘old’ 310.51 driver compiled OK, but didn’t work correctly … Continue reading →
Just installed 3.10-rc3 on the test system, and the latest NVIDIA drivers (310.51, and 319.23 beta) both compile OK with the patch mentioned in the posting on 3.10-rc2 https://rglinuxtech.com/?p=738 The – rather complex – 3.10 patch for vmnet works, but there is still no patch for vmblock, which fails to compile: /tmp/modconfig-J79ptB/vmblock-only/linux/inode.c:49:4: warning: initialization from incompatible pointer … Continue reading →
As reported by Walter Layher and Mal Haak, there is a now a patch available for the NVIDIA drivers on kernel 3.10-rc2, and it works successfully… For details and a link, see the comments below the original article: https://rglinuxtech.com/?p=733 Update: Tested with patched drivers 310.51 (Released) and 319.17 (Beta) on kernel 3.10-rc2, and both compile OK.. Robert … Continue reading →
My swap file boot failure turned out – as I suspected – to be self-inflicted, as I had somehow managed to ‘unselect’ the ”support for paging of anonymous memory (swap)” option under General setup… Once this was corrected, the 3.9.x kernel compiled – and booted – successfully.. Kernel 3.9.3 compiles the latest VMware (9.02) and NVIDIA (310.51 … Continue reading →
Just updated my HP6830s laptop to kernel 3.9.1, and got a hang at boot: ……………. Mounting /boot… systemd[1]: segfault at 0 ip 00007fede1d04241 sp 00007fff8e4fdf20 error 4 in libc-2.16.so[7fede1c90000+1ad000] [FAILED] Failed to activate swap /dev/disk/by-uuid/82145a5b-0a2f-4659-9f14-8acf69aea7b4. …………….. [ OK ] Reached target Swap. <<< HANG >>> Reverted to 3.9.0, and everything was OK… No mention of this – … Continue reading →
Just noticed there is now an official 3.8.y kernel, at: https://github.com/raspberrypi/linux/tree/rpi-3.8.y-temp This may change to just .…/rpi-3.8.y later.. Code is based on the latest 3.8 kernel – 3.8.4. Select config from: arch/arm/configs/bcmrpi_cutdown_defconfig arch/arm/configs/bcmrpi_emergency_defconfig arch/arm/configs/bcmrpi_defconfig arch/arm/configs/bcmrpi_quick_defconfig I used # make bcmrpi_defconfig Then # make xconfig Under <File systems>, I deselected all file systems support, except ext2/3/4.. Under <File … Continue reading →
Just updated the Raspberry Pi to kernel 3.8.3, by applying the incremental patch, from ftp://ftp.kernel.org/pub/linux/kernel/v3.0/incr/patch-3.8.2-3.bz2 Fedora release 18 (Spherical Cow) Kernel 3.8.3-pi on an armv6l (ttyAMA0) ……………….. # uname -a Linux rgpi 3.8.3-pi #2 Sun Mar 17 20:27:05 GMT 2013 armv6l armv6l armv6l GNU/Linux Attempts to ‘hack’ 3.9-rc2 by applying the standard kernel.org patch to my Pi … Continue reading →
Just updated the raspberry Pi to kernel 3.8.2, by applying the incremental patch at: ftp://ftp.kernel.org/pub/linux/kernel/v3.0/incr/patch-3.8.1-2.bz2 – which worked fine.. Fedora release 18 (Spherical Cow) Kernel 3.8.2-pi on an armv6l (ttyAMA0) ………………… # uname -a Linux rgpi 3.8.2-pi #1 Mon Mar 4 12:23:25 GMT 2013 armv6l armv6l armv6l GNU/Linux I tried applying the kernel.org 3.9-rc1 patch to the … Continue reading →
Just updated the test system to 3.9-rc1, and with the usual softlink*, and (3.8-patched) VMware 9.01, and NVIDIA 310.32, everything compiled OK. * # ln -s /usr/src/linux-3.9-rc1/include/generated/uapi/linux/version.h /usr/src/linux-3.9-rc1/include/linux/version.h $ uname -a Linux rg6830l 3.9.0-rc1 #1 SMP Mon Mar 4 11:13:53 GMT 2013 x86_64 x86_64 x86_64 GNU/Linux Robert Gadsdon. March 4th, 2013.
Continue reading →I have – after some messy hacking – managed to get the Raspberry Pi updated to kernel 3.8.0.. The starting point was the 3.7.1 Pi code, at https://github.com/Olipro/linux-RPi. The kernel.org patch for 3.8.0 assumes the code base is 3.7.0, so I had to ‘revert’ the 3.7.1 patch. The ‘incremental’ patches at kernel.org start with the 3.7.1 – … Continue reading →