Yet another ‘lockup’ – this time with 3.18.. So, as the problem also exists with 3.17.x, I have taken the unusual step of reverting to Kernel 3.16.7, for the time being! Some of the latest correspondence on the issue, here: http://lkml.iu.edu/hypermail/linux/kernel/1412.1/03302.html Robert Gadsdon. December 12, 2014.
Continue reading →Updated the CuBox-i4 Pro to Kernel 3.18, and now use the complete ‘device tree’ zImage and dtb boot method: The source can be found here: https://github.com/jmontleon/fedora-20-cubox-i_hb/tree/3.18.0 – and the u-boot boot commands are: setenv bootargs “root=/dev/mmcblk0p3 rootfstype=ext4 rootwait console=ttymxc0,115200n8 console=tty1 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32” setenv bootcmd “load mmc 0:1 0x10800000 zImage; load mmc 0:1 0x18000000 imx6q-cubox-i.dtb; bootz 0x10800000 – 0x18000000” … Continue reading →
I have managed to get Kernel 3.18-rc7 to boot on my Odroid U3, but it is still very unstable.. Fedora release 21 (Twenty One) Kernel 3.18.0-rc7 on an armv7l (ttySAC1) rgodroid login: $ uname -a Linux rgodroid 3.18.0-rc7 #3 SMP PREEMPT Wed Dec 3 18:41:29 EST 2014 armv7l armv7l armv7l GNU/Linux Sometimes the device will boot without … Continue reading →
Just upgraded to VMware Workstation 11.0, and – as expected – it compiles and loads/runs OK with Kernel 3.17 (3.17.4) and 3.18 (3.18-rc7) without the need for any patches.. Release notes are here: https://www.vmware.com/support/ws/doc/workstation-11-release-notes.html I have not – yet – had a chance to test functionality with a Linux guest, especially with regard to shared folders.. Robert … Continue reading →
Just installed Kernel 3.17-rc7, and the usual ‘latest’ drivers – NVIDIA 340.58 and 346.16, and VMware 10.0.4 with the vmnet patch – compile and load OK.. $ uname -a Linux rg6830l 3.18.0-rc7 #1 SMP PREEMPT Mon Dec 1 13:52:29 PST 2014 x86_64 x86_64 x86_64 GNU/Linux Details of changes etc. are here: http://lkml.iu.edu/hypermail/linux/kernel/1411.3/05016.html It seems that – despite … Continue reading →
A problem that still plagued the 3.18-rc series of kernel releases now seems to affect 3.17 as well.. I have had two complete system hangs with 3.17.3 and 3.17.4 on my main system in the last two weeks, and thought at first that these were caused by KDE and/or NVIDIA hangs, but then found that I could … Continue reading →
Just installed Kernel 3.18-rc6, and the latest NVIDIA drivers – 340.58 and 346.16 – compile and load OK… Although VMware have just released version 10.0.4, this still needs the ‘vmnet patch’ to compile OK, with kernels 3.17 and 3.18.. # uname -a Linux rg6830l 3.18.0-rc6 #1 SMP PREEMPT Sun Nov 23 23:41:40 PST 2014 x86_64 x86_64 x86_64 … Continue reading →
VMware have released VMware Workstation version 10.0.4, but it still doesn’t compile with Kernel 3.17 or later.. In fact, the only ‘fix’ appears to be for ‘memory problems with Windows 8.1 and Server 2012’, according to the release notes: https://www.vmware.com/support/ws10/doc/workstation-1004-release-notes.html It would appear that up-to-date compatibility is being kept for the next major release, which is due … Continue reading →
Just installed the kernel.org version of kernel 3.18-rc4 on the Odroid U3, and this time it completed the boot, but still had a ‘tombstone’: …………… cam-power-domain: Power-on latency exceeded, new value 413333 ns cam-power-domain: Power-on latency exceeded, new value 564291 ns Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = ee328000 [00000010] *pgd=00000000 … Continue reading →
Tested Kernel 3.18-rc3 and found that it would not boot with the .config that worked OK with -rc1.. Re-created a new .config from scratch, and now my temporary test system (HP6830 laptop) boots OK, but overall performance still seems rather sluggish.. # uname -a Linux rg6830l 3.18.0-rc3 #1 SMP PREEMPT Mon Nov 3 18:19:06 PST 2014 x86_64 … Continue reading →