Updated the test system to Kernel 3.19 ‘final’, and – as expected – the latest NVIDIA (346.35) and VMware 11.0 (with the vmnet patch..) compile and boot/load OK.. Quite a lot of changes from -rc7, and some reverted.. More details here : http://lkml.iu.edu/hypermail/linux/kernel/1502.1/00199.html $ uname -a Linux rg6830l 3.19.0 #1 SMP Mon Feb 9 14:53:53 PST 2015 … Continue reading →
This is a workflow for compilation of a kernel + device tree for the Odroid U3. There are other ways of doing this, but this one works, for me.. Compilation works fine on the device itself, so no need for cross-compilations.. This is for a device with root filesystem and boot partition on one SDcard.. Source from: … Continue reading →
Installed Kernel 3.19-rc7 on the test system, and the same comments apply as for -rc6. The latest NVIDIA driver (346.35) and VMware 11.0 – with the vmnet patches – install and load/run OK.. Changelog summary here: http://lkml.iu.edu/hypermail/linux/kernel/1502.0/00273.html $ uname -a Linux rg6830l 3.19.0-rc7 #1 SMP Mon Feb 2 19:00:25 PST 2015 x86_64 x86_64 x86_64 GNU/Linux It appears … Continue reading →
Updated to Kernel 3.19-rc6 on the test system, and – at last – the problem with NVIDIA driver GPL inconsistency has been fixed, and now driver 346.35 compiles and loads OK.. Details of changes since -rc5 are here: http://lkml.iu.edu/hypermail/linux/kernel/1501.3/00776.html And the important change is that /arch/x86/mm/init.c now has EXPORT_SYMBOL(__cachemode2pte_tbl) instead of EXPORT_SYMBOL_GPL(__cachemode2pte_tbl)..etc.. VMware 11 – with the … Continue reading →
After the solution to the Kernel 3.19/vmnet problem mentioned in previous posts, I have produced a fix that includes tests for kernel versions, and works with Kernel 3.19 and with earlier kernel versions.. This is probably not the most elegant code, but it works – I have tested it with VMware 11.0 and Kernels 3.19-rc5 and 3.18.3 … Continue reading →
Thanks to Al Viro, and to coderus on the VMware forum, we now have a solution for vmnet and Kernel 3.19, as follows: In vmnet-only/driver.c (lines 269, 1194, and 1195): Replace instances of f_dentry with f_path.dentry In vmnet-only/userif.c (line 526): Replace return skb_copy_datagram_iovec(skb, 0, &iov, len); with struct iov_iter to; iov_iter_init(&to, READ, &iov, 1, … Continue reading →
Tested the lates NVIDIA driver (346.35) today, and although it fixes the f_dentry error, the compile still fails with Kernel 3.19-rc4, due to the incompatible GPL problem: FATAL: modpost: GPL-incompatible module nvidia.ko uses GPL-only symbol ‘__cachemode2pte_tbl’ /usr/src/linux-3.19-rc4/scripts/Makefile.modpost:90: recipe for target ‘__modpost’ failed It has been pointed out that this can be fixed by simply changing the license … Continue reading →
Updated the test system to Kernel 3.19-rc4, and the same comments apply as for -rc3.. Still no fixes for NVIDIA and VMware, yet.. I tried the CuBox-i4 Pro with a ‘standard’ kernel from kernel.org, rather than the ‘patched’ version used previously, and it booted OK.. Fedora release 21 (Twenty One) Kernel 3.19.0-rc4 on an armv7l (ttymxc0) …………. … Continue reading →
Updated the test system to Kernel 3.19-rc3, and there is still no fix for VMware (11.0) and the latest NVIDIA (340.65 and 346.22) drivers… The NVIDIA problem will involve getting around a GPL-incompatible module issue.. FATAL: modpost: GPL-incompatible module nvidia.ko uses GPL-only symbol ‘__cachemode2pte_tbl’ 3.19-rc3 installs and runs OK on the CuBox-i4 Pro: $ uname -a Linux … Continue reading →
Updated the test (Intel) system, and the Cubox-i4 Pro to Kernel 3.19-rc2.. NVIDIA and VMware still do not compile (see 3.19-rc1 article for details https://rglinuxtech.com/?p=1258) and – so far – there does not seem to be a patch for either. The NVIDIA GPL code incompatibility issue may be more convoluted to fix ‘legally’.. I tried more code … Continue reading →