↓
 

Adventures With Linux ™

Linux Technologies and Fun Times - and Technology Commentary..

  • Home
  • About the Author…
  • Copyright and Trademarks..

Category Archives: Opinion

Post navigation

← Older posts
Newer posts →

ARM64 – Odroid C2 – Boots with Patched 4.8-rc4 – Ethernet Issues..

Adventures With Linux ™ Posted on September 1, 2016 by RGSeptember 1, 2016

Decided to try the Odroid C2 with the latest Kernel, and recently-released patches for MMC support.. Used the (patched) version of 4.8-rc4 from here:  https://github.com/ioft/linux/tree/c2    Thanks to umiddelb for producing this, which incorporates the (e)MMC support patches, and also includes patches providing the latest version of the dwmac_meson8b Ethernet driver, and associated mods to the device tree … Continue reading →

Posted in aarch64, ARM64, compilation, Hacks, kernel, Linux / ARM, Odroid C2, Opinion, Performance | Tagged arm64, boot success, ethernet problems, kernel 4.8-rc4 patched, odroid c2 | Leave a reply

X86_64 – UP Board – ‘Cherry Trail’ – Sound – Working..

Adventures With Linux ™ Posted on August 26, 2016 by RGAugust 26, 2016

The only missing OS component on the new UP Board (x5-Z8350) was that sound (HDMI) was not present..    After a bit of digging, I found some patches for Kernel 4.5, and a later patched kernel version that was supposed to work.. I tried the patched version of 4.7.0 from here:  https://github.com/plbossart/sound/tree/byt-cht-hdmi-v4.7  but found that the compile failed: … Continue reading →

Posted in Cherry Trail, compilation, Crash and Burn.., Fedora, fix, Hacks, Intel Atom, kernel, Linux, Opinion, Performance, UP Board | Tagged 4.7.0, cherry trail, compiler fix, hdmi sound, intel, kernel, linux, patched kernel, success, up board, Z8350 | 8 Replies

ARM64 – Hikey to Kernel 4.7 – and Polkitd Fix..

Adventures With Linux ™ Posted on July 25, 2016 by RGJuly 25, 2016

Managed to update the Hikey ARM64 SoC to the latest kernel – 4.7 Final. Fedora 24 (Twenty Four) Kernel 4.7.0 on an aarch64 (ttyAMA0) ………………………. # uname -a Linux rghikey 4.7.0 #1 SMP PREEMPT Sun Jul 24 19:53:54 EDT 2016 aarch64 aarch64 aarch64 GNU/Linux On boot, and when the network initialised, polkitd segfaulted again, the same as … Continue reading →

Posted in aarch64, ARM64, boot, compilation, fix, Hacks, Hikey, kernel, Linux / ARM, Opinion, Performance | Tagged aarch64, arm64, fix, hikey, kernel 4.7 final, mozjs17 patch, polkitd segfault, soc, success | 4 Replies

KERNEL – 4.7 Released – OK with Patched VMware and NVIDIA..

Adventures With Linux ™ Posted on July 24, 2016 by RGJuly 24, 2016

Kernel 4.7 has been released – slightly later than usual – and brief details are here:  http://lkml.iu.edu/hypermail/linux/kernel/1607.3/00150.html $ uname -a Linux rglinux-i7 4.7.0 #1 SMP Sun Jul 24 14:34:37 PDT 2016 x86_64 x86_64 x86_64 GNU/Linux Neither VMware nor NVIDIA have drivers that work with this kernel version, but the 4.7-rc patched versions of VMware 12.1.1 and NVIDIA … Continue reading →

Posted in Hacks, kernel, Linux, NVIDIA, Opinion, Performance, VMware | Tagged fix, kernel 4.7, nvidia 367.35 patched, ok, released, vmware 12.1.1 patched | 1 Reply

ARM – Next CHIP – Waiting for Hynix NAND Support..

Adventures With Linux ™ Posted on July 15, 2016 by RGJuly 15, 2016

Tested some of the kernel versions possible (or not..) for the Next CHIP ARMv7, with mixed results..     I added an Ethernet/USB device (ax88179-based) on the USB hub, and the network connection works fine.. Linux-Next does not yet have the drivers for the Hynix NAND in the CHIP, although – with the rootfs separate on a USB stick … Continue reading →

Posted in armv7, compilation, Crash and Burn.., Hacks, kernel, Linux / ARM, Next CHIP, Opinion, Performance | Tagged armv7, code problems, github confusion, hynix, nand, next chip, support in progress | Leave a reply

ARM – Next CHIP ARMv7 – First Impressions..

Adventures With Linux ™ Posted on July 12, 2016 by RGJuly 12, 2016

After pre-ordering one many months ago, I finally got my Next CHIP ARMv7 system in the post.. It certainly is fairly small, but seems well-constructed..     Details are at http://docs.getchip.com/chip.html#chip-hardware After connecting the UART/USB cable, as normal, the system booted into a cut-down version of Debian..   There is no hdmi, or sdcard connector, or Ethernet, but the wi-fi … Continue reading →

Posted in arm, armv7, Fedora, Hacks, Linux, Linux / ARM, Next CHIP, Opinion, Performance | Tagged armv7, boot, fedora 24, first impressions, linux, next chip, success, ubifs | Leave a reply

ARM64 – Dragonboard 410c – Fail with Linux-Next..

Adventures With Linux ™ Posted on July 2, 2016 by RGJuly 2, 2016

After the – partial – success with the 96Boards Hikey, I tried the Qualcomm Dragonboard 410c, but the June 29 Linux-Next failed to boot successfully, with only one CPU initialising, and MMC errors, and eventual hang…. ……………………….. psci: failed to boot CPU1 (-95) CPU1: failed to boot: -95 CPU1: failed in unknown state : 0x0 psci: failed … Continue reading →

Posted in aarch64, alpha release, ARM64, boot, compilation, Crash and Burn.., Dragonboard, kernel, Linux / ARM, Opinion, Performance | Tagged 96boards, boot fail, cpu and mmc errors, dragonboard 410c, hang, june 29 release, linux-next, qualcomm | Leave a reply

ARM64 – Pi3 Still Very Unstable..

Adventures With Linux ™ Posted on June 21, 2016 by RGJune 21, 2016

I have tried the latest 4.7-next patched kernel, from https://github.com/anholt/linux/tree/bcm2837-64-next After some trials, I did manage to – just – get it to boot – after falling to an ’emergency console’, but the system is very unstable, with multiple recurring MMC errors.. ….. Give root password for maintenance (or press Control-D to continue): Error getting authority: Error … Continue reading →

Posted in aarch64, alpha release, ARM64, boot, compilation, Crash and Burn.., Hacks, kernel, Linux, Linux / ARM, Opinion, Raspberry Pi | Tagged arm64, crashes, kernel, kernel 4.7-rc3-next, linux, mmc errors, patched, raspberry pi 3, unstable | Leave a reply

NVIDIA – New Driver – Still Broken with Kernel 4.7 – Patch Fix OK..

Adventures With Linux ™ Posted on June 14, 2016 by RGJune 14, 2016

Just tested the latest NVIDIA driver – 367.27 – and it fails to compile with Kernel 4.7-rc3.     To fix this, the patch for 367.18 still works ( details at https://rglinuxtech.com/?p=1750 ). ……………….. Building modules, stage 2. MODPOST 4 modules CC /home/rgadsdon/Desktop/kernel/NVIDIA-Linux-x86_64-367.27.patched/kernel/nvidia-drm.mod.o LD [M] /home/rgadsdon/Desktop/kernel/NVIDIA-Linux-x86_64-367.27.patched/kernel/nvidia-drm.ko CC /home/rgadsdon/Desktop/kernel/NVIDIA-Linux-x86_64-367.27.patched/kernel/nvidia-modeset.mod.o LD [M] /home/rgadsdon/Desktop/kernel/NVIDIA-Linux-x86_64-367.27.patched/kernel/nvidia-modeset.ko CC /home/rgadsdon/Desktop/kernel/NVIDIA-Linux-x86_64-367.27.patched/kernel/nvidia-uvm.mod.o LD [M] /home/rgadsdon/Desktop/kernel/NVIDIA-Linux-x86_64-367.27.patched/kernel/nvidia-uvm.ko CC /home/rgadsdon/Desktop/kernel/NVIDIA-Linux-x86_64-367.27.patched/kernel/nvidia.mod.o LD … Continue reading →

Posted in compilation, Crash and Burn.., Hacks, kernel, Linux, NVIDIA, Opinion | Tagged compile fail with kernel 4.7-rc3, nvidia 367.27, patch ok | 2 Replies

ARM64 – Pine64 – Not Exactly ‘Compact’..

Adventures With Linux ™ Posted on June 7, 2016 by RGJune 7, 2016

I recently obtained one of the newly-released (- to the ‘public’..) Pine64 ARM64 systems…    My first reaction, was that it is a bit on the large side..  The board is over twice the size of the Odroid C2.. As usual, the ‘standard’ U-Boot was a heavily-customised old version, that only mounted Android-format Kernel ‘blob’s, but a hacked … Continue reading →

Posted in aarch64, ARM64, boot, compilation, Fedora, Hacks, hardware, kernel, Linux / ARM, Opinion, Performance, Pine64, success, U-Boot | Tagged arm64, hacks, kernel 4.7-rc1 patched, new, pine64, soc, u-boot, work-in-progress | 3 Replies

Post navigation

← Older posts
Newer posts →
Original content &copy Robert Gadsdon 2013
↑
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.