I have been testing Fedora 33 pre-release, and on x86_64 it seems relatively stable (usual caveats…) but on arm64 systems (Odroid N2 and Pi4) I found that after compiling a new kernel (5.8.3), the system booted, but login was impossible, and screen output was missing (uart/console was OK). Kernels compiled with Fedora 32 all booted OK, and … Continue reading →
Kernel 5.9-rc2 is out, and brief details of changes since -rc1 are here: http://lkml.iu.edu/hypermail/linux/kernel/2008.2/10710.html The patched VMware 16 prerelease versions of vmmon and vmnet compile OK, but any further tests will have to wait until the release of Workstation 16 in about a months time.. NVIDIA 450.66 can be made to (almost..) work, by applying the 5.9 … Continue reading →
After all the excitement around the release of Kernel 5.8, I ran some tests on the work-in-progress git version (August 9th) of Kernel 5.9-rc1. Obviously, there are more changes to come before RC1 is actually released.. NVIDIA 450.57 compile fails: ……………………. CC [M] /home/rgadsdon/NVIDIA-Linux-x86_64-450.57/kernel/nvidia-uvm/nv-kthread-q.o CC [M] /home/rgadsdon/NVIDIA-Linux-x86_64-450.57/kernel/nvidia-uvm/nv-kthread-q-selftest.o CC [M] /home/rgadsdon/NVIDIA-Linux-x86_64-450.57/kernel/nvidia-uvm/uvm8.o In file included from /home/rgadsdon/NVIDIA-Linux-x86_64-450.57/kernel/nvidia-uvm/uvm8.c:31: /home/rgadsdon/NVIDIA-Linux-x86_64-450.57/kernel/nvidia-uvm/uvm8_va_range.h: In … Continue reading →
I have been investigating alternatives, as VMware is currently a non-starter (literally..) with Kernel 5.8.. I installed the latest VirtualBox (6.1.97 r139689) from SVN (another blast from the past…) and managed – after some messing around – to get it to compile OK on my Fedora 32 test system with Kernel 5.8 (from kernel.org..) I had … Continue reading →
My 8GB Raspbery Pi 4 finally arrived, and I was looking forward to trying Fedora 32 and KDE/Plasma on it, and comparing it to the Odroid N2 from a few months back.. ( https://rglinuxtech.com/?p=2689 ) The Fedora 32 aarch64 install is supposed to support the Pi 4 now, but the resulting sdcard image failed to boot, with … Continue reading →
There is now an interim patch available, for NVIDIA 440.82 and Kernel 5.8, at https://gitlab.com/snippets/1986228 This should be applied as well as the 5.7 patch, and I have tested this with pre-release Kernel 5.8-git version from June 12th, and it works OK. Note that this is an interim patch, and may be updated once 5.8-rc1 is released.. … Continue reading →
I have updated some test systems (x86_64 and aarch64) to pre-beta Fedora 32, which now includes GCC 10: $ gcc –version gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8) There have been a couple of problems with kernel compilation, but in each case there was already a patch/workaround available.. https://www.spinics.net/linux/fedora/fedora-arm/msg13193.html and https://lkml.org/lkml/2020/1/29/494 The most serious problem was a … Continue reading →
I have recently acquired an Odroid N2 (4GB) and managed – with some difficulty – to get it to run a ‘modern’ U-Boot, Kernel 5.6-rc2, with EFI support, and Fedora 31. This time, there were no clues from OpenSuse, and all the examples I found still used the ancient/custom Hardkernel u-boot and a kernel.img ‘blob. Fortunately, the … Continue reading →
Kernel 5.6-rc1 is out, and brief details are here: http://lkml.iu.edu/hypermail/linux/kernel/2002.1/00576.html After the pre-release testing mentioned in my previous article, patched VMware 15.5.1 and patched/hacked NVIDIA 440.59 both compiled and ran, but with the same NVIDIA # startx tombstone, as previously mentioned. I had already created a patched NVIDIA runtime, to make things easier: # ./NVIDIA-Linux-x86_64-440.59-k56.run -s –install-libglvnd … Continue reading →
Kernel 5.6-rc1 should be out on Sunday, February 9th, but I noticed that early-version-test patches are already available for VMware 15.5.1, here: https://github.com/mkubecek/vmware-host-modules/tree/tmp/workstation-15.5.1-k5.6 These patches gave clues to what might affect NVIDIA as well, and I managed to get a GIT version of 5.6-rc1-pre (dated February 5th) to compile OK, and was able to use this. Of … Continue reading →