Managed to update the DragonBoard 410c to Linaro Kernel 4.1.0+, from here: git clone https://git.linaro.org/landing-teams/working/qualcomm/kernel.git -b integration-linux-qcomlt So far, I have made the kernel ‘monolithic’ with all necessary modules built-in (‘y” instead of ‘m’), as this was how the original Linaro/Qualcomm kernel was built.. As the 410c uses the android fastboot, it would seem that the kernel/boot … Continue reading →
After quite a lot of messing about, I got Fedora 22 running on the ARM64 DragonBoard 410c: Fedora release 22 (Twenty Two) Kernel 4.0.0-linaro-lt-qcom on an aarch64 (ttyMSM0) ………… $ uname -a Linux rg410c rg410c.almaden 4.0.0-linaro-lt-qcom #1 SMP PREEMPT Fri Jun 5 15:17:06 UTC 2015 aarch64 aarch64 aarch64 GNU/Linux Still running the ‘stock’ Linaro/Qualcom version of Kernel … Continue reading →
Updated the Odroid U3 to Kernel 4.1-rc8, from https://github.com/tobiasjakobi/linux-odroid/tree/odroid-4.1.y Fedora release 22 (Twenty Two) Kernel 4.1.0-rc8 on an armv7l (ttySAC1) …………… ]# uname -a Linux rgodroid 4.1.0-rc8 #1 SMP Wed Jun 17 16:20:50 PDT 2015 armv7l armv7l armv7l GNU/Linux As it has been some time since I (unsuccessfully) tried a ‘mainline’ kernel on the U3, I may … Continue reading →
After updating the Odroid U3 to kernel 4.1-rc2 (see separate post) I encountered more SELinux / Fedora 22 issues.. This time, SELinux tried to enable itself in ‘targeted’ mode on reboot, despite being ‘disabled’ in the config file.. …. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Preprocess NFS configuration. … Continue reading →
I updated the CuBox-i4-Pro (Fedora 22) to Kernel 4.1-rc2, but the (re)boot process was very sluggish, with several key commands failing: ….. systemd[1]: Unit dbus.service entered failed state ….. [FAILED] Failed to start Login Service. ….. [FAILED] Failed to start Modem Manager. ….. [FAILED] Failed to start Avahi mDNS/DNS-SD Stack. ….. [FAILED] Failed to start Network Manager. … Continue reading →
As Kernel 4.1-rc1 is not released yet, I tested the April 24 version of linux-next, to see how VMware and NVIDIA compiles would behave.. # uname -a Linux rg6830l 4.0.0-next-20150424 #2 SMP Sun Apr 26 12:04:54 PDT 2015 x86_64 x86_64 x86_64 GNU/Linux With this version, VMware 11.1 (with the 3.19 vmnet patch) compiled and loaded OK, but … Continue reading →
Tried updating the Raspberry Pi-s (Classic model B and Pi2) to Kernel 4.0, from https://github.com/raspberrypi/linux/tree/rpi-4.0.y, and my first attempt was – it seems – too soon, as the Classic Pi (armv6) failed to boot at all, and the Pi2 (armv7) only booted as far as: …………. bcm2708_dma: DMA manager at f3007000 bcm2708_gpio: bcm2708_gpio_probe 80625490 vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 … Continue reading →
Updated the DreamPlug and CuBox-i4Pro to kernel 4.0 from kernel.org: Fedora release 18 (Spherical Cow) Kernel 4.0.0 on an armv5tel (ttyS0) ……… # uname -a Linux rgdreamplug 4.0.0 #1 Sun Apr 12 22:53:28 PDT 2015 armv5tel armv5tel armv5tel GNU/Linux Fedora release 22 (Twenty Two) Kernel 4.0.0 on an armv7l (ttymxc0) ……… ]# uname -a Linux rgcubox 4.0.0 … Continue reading →
Updated to Kernel 4.0 (from kernel.org), and the latest NVIDIA driver (346.59) and ‘patched’ VMware 11.1 both compile and install/run OK.. $ uname -a Linux rglinux-i7 4.0.0 #1 SMP Sun Apr 12 17:26:04 PDT 2015 x86_64 x86_64 x86_64 GNU/Linux Brief details of changes since -rc7 are here: http://lkml.iu.edu/hypermail/linux/kernel/1504.1/03200.html Robert Gadsdon. April 12, 2015.
Continue reading →Updated the test system to Kernel 4.0-rc7, and – as with -r6 – the patched* VMware 11.1 and NVIDIA 349.12 compiled and loaded OK.. $ uname -a Linux rg6830l 4.0.0-rc7 #1 SMP Mon Apr 6 18:25:10 PDT 2015 x86_64 x86_64 x86_64 GNU/Linux Brief details of changes since -rc6 are here: http://lkml.iu.edu/hypermail/linux/kernel/1504.0/03029.html If all goes well, 4.0 ‘final’ … Continue reading →