{"id":371,"date":"2012-08-23T09:51:42","date_gmt":"2012-08-23T09:51:42","guid":{"rendered":"http:\/\/rglinuxtech.com\/?p=371"},"modified":"2012-08-23T09:51:42","modified_gmt":"2012-08-23T09:51:42","slug":"apc-fixing-fedoras-rogue-fsck","status":"publish","type":"post","link":"https:\/\/rglinuxtech.com\/?p=371","title":{"rendered":"APC &#8211; Fixing Fedora&#8217;s Rogue Fsck&#8230;"},"content":{"rendered":"<p>The &#8216;default&#8217; Fedora 13 system for ARM mounts the root as nfs..\u00a0\u00a0 To change it to the (correct) ext3, modify \/etc\/fstab as follows:<\/p>\n<pre># cat \/etc\/fstab\n<strong>\/dev\/mmcblk0p2\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 ext3\u00a0\u00a0\u00a0 defaults\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 1 1<\/strong>\n<strong>\/dev\/mmcblk0p1\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/boot\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 vfat\u00a0\u00a0\u00a0 defaults\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 1 0<\/strong>\ndevpts\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/dev\/pts\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 devpts\u00a0 gid=5,mode=620\u00a0 0 0\ntmpfs\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/dev\/shm\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 tmpfs\u00a0\u00a0 defaults\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 0 0\nproc\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/proc\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 proc\u00a0\u00a0\u00a0 defaults\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 0 0\nsysfs\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/sys\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 sysfs\u00a0\u00a0 defaults\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 0 0<\/pre>\n<p>But&#8230; this will cause a problem at boot time, with the default APC kernel boot, as Fedora 13 will try to run <em>fsck<\/em> on a normally-mounted file system &#8211; which is a <strong>*bad thing*<\/strong>&#8230;<br \/>\nSo, change the APC kernel boot parameters:<\/p>\n<p>from<\/p>\n<pre>mem=460M root=\/dev\/mmcblk0p2 rw initrd=0x01400000,32M console=ttyS0,115200n8 mbtotal=52M<\/pre>\n<p>to<\/p>\n<pre>mem=460M root=\/dev\/mmcblk0p2 <span style=\"text-decoration:underline;\"><strong>ro<\/strong><\/span> initrd=0x01400000,32M console=ttyS0,115200n8 mbtotal=52M<\/pre>\n<p>&#8211; and then all will be OK..<\/p>\n<p>But remember &#8211; this is all antique stuff, as later versions of Fedora moved to <em>systemd<\/em>, and all this changed&#8230;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>The &#8216;default&#8217; Fedora 13 system for ARM mounts the root as nfs..\u00a0\u00a0 To change it to the (correct) ext3, modify \/etc\/fstab as follows: # cat \/etc\/fstab \/dev\/mmcblk0p2\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 ext3\u00a0\u00a0\u00a0 defaults\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 1 1 \/dev\/mmcblk0p1\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/boot\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 vfat\u00a0\u00a0\u00a0 defaults\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 1 0 devpts\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/dev\/pts\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 devpts\u00a0 gid=5,mode=620\u00a0 0 0 tmpfs\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/dev\/shm\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 tmpfs\u00a0\u00a0 defaults\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 0 0 proc\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \/proc\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 proc\u00a0\u00a0\u00a0 defaults\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 0 0 sysfs\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 <span class=\"excerpt-dots\">&hellip;<\/span> <a class=\"more-link\" href=\"https:\/\/rglinuxtech.com\/?p=371\"><span class=\"more-msg\">Continue reading &rarr;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[3,5,6,10,11,14,16,19,20],"tags":[89,101,146,155,161,170,171],"class_list":["post-371","post","type-post","status-publish","format-standard","hentry","category-apc","category-compilation","category-crash-and-burn","category-fedora","category-hacks","category-kernel","category-linux-arm","category-opinion","category-performance-2","tag-apc-2","tag-boot","tag-ext3","tag-fedora-13","tag-fix","tag-fsck","tag-fstab"],"_links":{"self":[{"href":"https:\/\/rglinuxtech.com\/index.php?rest_route=\/wp\/v2\/posts\/371","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/rglinuxtech.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/rglinuxtech.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/rglinuxtech.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/rglinuxtech.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=371"}],"version-history":[{"count":0,"href":"https:\/\/rglinuxtech.com\/index.php?rest_route=\/wp\/v2\/posts\/371\/revisions"}],"wp:attachment":[{"href":"https:\/\/rglinuxtech.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=371"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/rglinuxtech.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=371"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/rglinuxtech.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=371"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}