↓
 

Adventures With Linux ™

Linux Technologies and Fun Times - and Technology Commentary..

  • Home
  • About the Author…
  • Copyright and Trademarks..

Category Archives: kernel

Post navigation

← Older posts
Newer posts →

3.8? Best to wait for -rc2..

Adventures With Linux ™ Posted on January 2, 2013 by RGJanuary 2, 2013

3.8-rc1 has several ‘issues’ – especially with breakage of  Userspace…     I’m going to wait for -rc2, which will – hopefully – be a bit less ‘dangerous’! Robert Gadsdon.   January 2nd, 2013

Continue reading →
Posted in Crash and Burn.., Hacks, kernel, Linux, Opinion | Tagged 3.8-rc1 problems, kernel, linux, wait for -rc2 | Leave a reply

3.8-rc1 and NVIDIA… Earlier Driver Version Compiles OK!

Adventures With Linux ™ Posted on December 29, 2012 by RGDecember 29, 2012

After more testing, I discovered that – unusually – the very latest driver (313.09) fails to compile with kernel 3.8-rc1, but an earlier driver – 310.14 – does compile OK! I won’t do too much more testing, as 3.8-rc1 breaks some KDE apps (see Linus’ angry rant on the LKML!).   Hopefully 3.8-rc2 will be out soon.. Robert Gadsdon.   … Continue reading →

Posted in compilation, Crash and Burn.., kernel, Linux, NVIDIA, Performance | Tagged 310.14 success, 313.09 fails, compilation, kernel 3.8-rc1, nvidia, test | Leave a reply

Dreamplug to 3.8-rc1

Adventures With Linux ™ Posted on December 26, 2012 by RGDecember 26, 2012

Just updated the Dreamplug to 3.8-rc1, without any problems..   Used the .config from 3.7.. Fedora release 18 (Spherical Cow) Kernel 3.8.0-rc1 on an armv5tel (ttyS0) ………………. # uname -a Linux rgdreamplug 3.8.0-rc1 #1 Wed Dec 26 22:00:22 GMT 2012 armv5tel armv5tel armv5tel GNU/Linux Robert Gadsdon.   December 26th 2012.

Continue reading →
Posted in compilation, Dreamplug, Fedora, kernel, Linux / ARM | Tagged arm, dreamplug, kernel 3.8-rc1, linux, success | Leave a reply

3.8-rc1 – Breaks NVIDIA, but VMware OK..

Adventures With Linux ™ Posted on December 22, 2012 by RGDecember 22, 2012

Just installed kernel 3.8-rc1 on my test system.. VMware 9.0.1 compiles and installs OK, with the 3.7 ‘softlink’ workaround: # ln -s /usr/src/linux-3.8-rc1/include/generated/uapi/linux/version.h /usr/src/linux-3.8-rc1/include/linux/version.h But…  NVIDIA (313.09) compile fails, with a lot of errors: ………………../home/rgadsdon/NVIDIA-Linux-x86_64-313.09/kernel/conftest.h:10:2: error: #error remap_page_range() conftest failed! /home/rgadsdon/NVIDIA-Linux-x86_64-313.09/kernel/conftest.h:12:2: error: #error vmap() conftest failed! /home/rgadsdon/NVIDIA-Linux-x86_64-313.09/kernel/conftest.h:28:2: error: #error kmem_cache_create() conftest failed! /home/rgadsdon/NVIDIA-Linux-x86_64-313.09/kernel/conftest.h:30:2: error: #error on_each_cpu() conftest … Continue reading →

Posted in compilation, Crash and Burn.., Hacks, kernel, Linux, NVIDIA, VMware | Tagged kernel 3.8-rc1, nvidia compile fail, test, vmware ok | Leave a reply

End of an Era – Linus Removes .386 CPU Support

Adventures With Linux ™ Posted on December 12, 2012 by RGDecember 12, 2012

Linux was first developed by Linus on an old .386 system, way back in 1991, and now that cord has been cut, and .386 CPUs are no longer supported: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=743aa456c1834f76982af44e8b71d1a0b2a82e21 From the comments: Pull “Nuke 386-DX/SX support” from Ingo Molnar:  “This tree removes ancient-386-CPUs support and thus zaps quite a bit   of complexity:     24 files changed, 56 insertions(+), 425 deletions(-)   … which complexity has plagued us with extra work whenever we wanted   to change SMP primitives, for years.   Unfortunately there’s a nostalgic cost: your old original 386 DX33   system from early 1991 won’t be able to boot modern Linux kernels   anymore.  Sniff.” I’m not sentimental.  Good riddance. My first ‘home’ Linux system – in 1997 – was an HP Vectra 486 … Continue reading →

Posted in compilation, kernel, Linux | Tagged 386 cpu, history, kernel, linux, support removed | Leave a reply

Dreamplug to 3.7 – and an Obsolete Patch..

Adventures With Linux ™ Posted on December 12, 2012 by RGDecember 12, 2012

Just updated the Dreamplug kernel to 3.7, and – although I don’t use it – decided to see if the Marvell-supplied 8688_UAP (Access Point) patch still worked.. Not surprisingly, the patch worked, but the compilation failed: CC [M]  drivers/net/wireless/libertas_uap/uap_main.o drivers/net/wireless/libertas_uap/uap_main.c: In function ‘uap_init_sw’: drivers/net/wireless/libertas_uap/uap_main.c:446:44: warning: passing argument 3 of ‘netlink_kernel_create’ makes pointer from integer without a cast … Continue reading →

Posted in compilation, Dreamplug, Fedora, kernel, Linux / ARM, Performance | Tagged 3.7, compile, dreamplug, kernel, marvell uap 8688 patch fail, success | Leave a reply

Finally – 3.7 is out..

Adventures With Linux ™ Posted on December 11, 2012 by RGDecember 11, 2012

Finally, kernel 3.7 is released… I updated my main x86_64 system, and all seems to be OK, as expected.    The latest NVIDIA driver – 310.19 – compiles and runs OK, and VMware 9.0.1 compiles after the usual workaround for version.h: # ln -s /usr/src/linux-3.7/include/generated/uapi/linux/version.h /usr/src/linux-3.7/include/linux/version.h Note that this example is for the official source from kernel.org.    You … Continue reading →

Posted in compilation, kernel, Linux, NVIDIA, VMware | Tagged 3.7, compile, kernel, linux, nvidia, success, vmware | 2 Replies

Raspberry Pi – Kernel to 3.6.9..

Adventures With Linux ™ Posted on December 7, 2012 by RGDecember 7, 2012

The 3.6.y branch of the kernel on GitHub has now been updated to 3.6.9, in step with the ‘mainline’ kernel.. To get the source, you may need to explicitly reference the rpi-3.6.y.tar.gz download, instead of the (default) rpi-3.2.7.tar.gz https://github.com/raspberrypi/linux/archive/rpi-3.6.y.tar.gz Compilation was as described in earlier posts.. Fedora release 17 (Beefy Miracle) Kernel 3.6.9-pi on an armv6l (ttyAMA0) … Continue reading →

Posted in compilation, Fedora, kernel, Linux / ARM, Raspberry Pi | Tagged 3.6.9, 3.6.y branch, github, kernel, raspberry pi, success | Leave a reply

APC – Kernel Source – Signs of Life?

Adventures With Linux ™ Posted on December 4, 2012 by RGDecember 4, 2012

After a gap of over three months, there seems to be some activity with the APC kernel and uboot source on GitHub.. https://github.com/apc-io/apc-8750 Changes were made on December 2nd, but would appear to have been in error, for some reason, and the latest ‘commit’ is marked ‘Revert’..     The kernel version seems to have been the same, but … Continue reading →

Posted in APC, compilation, Crash and Burn.., kernel, Linux / ARM | Tagged apc, error, github, kernel, revert, update | Leave a reply

Latest and Greatest.. 3.6.8 and 3.7-rc7..

Adventures With Linux ™ Posted on November 27, 2012 by RGNovember 27, 2012

Kernel 3.6.8 is just business as usual, and everything works as expected..   There might not have been a need for another -rc before 3.7 was released, but apparently there was a late rush of changes and bugfixes, so now there is 3.7-rc7..   Same caveats apply as for -rc6..   NVIDIA driver (310.19) compiles OK, and VMware 9.0.1 still … Continue reading →

Posted in compilation, Crash and Burn.., Hacks, kernel, Linux, NVIDIA, VMware | Tagged 3.6.8, 3.7-rc7, kernel updates, nvidia, success, vmware, workaround | Leave a reply

Post navigation

← Older posts
Newer posts →
Original content &copy Robert Gadsdon 2013
↑
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.